Graphite Packing/ Graphite

Graphite Packing/ Graphite is a graphite packing braided with the highest quality continuous filament graphite yarn, interlock braided. Used for severe services in pumps and valves. Treated throughout with graphite particles

Temperature pH Pressure Speed
1000°F (540°C) 0-14 600 PSI (41 bar) 2000 FPM
  • graphite-powder

Graphite Packing/ PTFE

Graphite Packing/ PTFE Braided with high purity graphite yarn. Interlock braided and impregnated with PTFE. Combination of graphite and PTFE make an excellent non-contaminating and chemical resistance packing.

Temperature pH Pressure Speed
600°F (315°C) 0-14 1000 PSI (700 bar) 2000 FPM
  • graphite-powder

Flax

Flax Braided flax fiber of the highest quality. Finished braid is impregnated with waterproof hydraulic lubricant. graphite coated. Service packing for the marine industry.

Temperature pH Pressure Speed
Temperature: 250°F (120°C) Construction: Interlocked 5-9 250 PSI 1200 FPM
  • graphite-powder

Aramid Packing

Aramid Packing Braided aramid packing treated with lubricant. Extremely strong characteristic makes it ideal packing for abrasive applications such as sand slurry and paper slurry. Impregnated with PTFE dispersion is also available.

Temperature pH Pressure Speed
550°F (260°C) 3-11 500 PSI (35 bar) 1900 FPM
  • graphite-powder

Synthetic Packing /PTFE

Synthetic Packing /PTFE Braided synthetic packing impregnated with PTFE before and after braiding. Break-in lubricant is also added. Good chemical resistance.

Temperature pH Pressure Speed
500°F (260°C) 2-13 300 PSI (20 bar) 2200 FPM
  • graphite-powder

Synthetic Packing /Graphite

Synthetic Packing /Graphite Each strand of synthetic yarn is individually coated with graphite and impregnated with a high temperature lubricant. Finish packing braided is surface coated with graphite. A good general service and asbestos replacement packing.

Temperature pH Pressure Speed
450°F (230°C) 4-10 300 PSI (20 bar) 1500 FPM
  • graphite-powder

Tank Lid Packing

Tank Lid Packing is designed with a high pressure-resilient rubber core, which is wrapped with high temperature resistant fiber. The core is then over-braided with chemical resistant fiber yarn. The combination of rubber core and chemical resistant fiber yarn make style 999 an excellent packing to use on tank covers, hatches and lids on road and rail.

Temperature pH Pressure Speed
210°F (100°C) 0-14 200 PSI (15 bar) 1000 FPM
  • graphite-powder

High Performance Synthetic Packing

High Performance Synthetic Packing Braided using NAVloid yarn, is an excellent general-purpose pump packing. Impregnated with PTFE and special break-in lubricant.

Temperature Pressure
480°F (250°C) 300 PSI (20 bar)
  • graphite-powder

Papermill /Caustic Packing

Papermill /Caustic Packing Braided using YC Thermo Fiber, impregnated with PTFE. provides outstanding leakage control, excellent heat resistance and easy on the shaft. Ideal for high caustic levels seen in pulp and paper, chemical process.

Temperature pH Pressure Speed
550°F (260°C) 1-13 300 PSI (20 bar) 2000 FPM
  • graphite-powder

PTFE Graphite Packing

PTFE Graphite Packing PTFE graphite packing is braided from PTFE yarn containing graphite particles. Excellent general services for sealing on alkalis, solvents, water, steam, acid except strong oxidizing acids.

Temperature pH Speed
550°F (287°C) steam 0-14 except strong oxidizers 4000 FPM
  • graphite-powder

PTFE Graphite Packing

Made from highest quality graphite

Thermally conductive, self lubricating

Used on all rotating shafts

Temperature pH Speed
550°F (287°C) steam 0-14 except strong oxidizers 4400 FPM
  • graphite-powder

PTFE Graphite Packing / Aramid Fiber

PTFE graphite packing reinforced edges with aramid prevents gap extrusions within high pressure and temperature. Good sliding velocity and thermal conductivity. Great service packing for severe pump applications.

Temperature pH
550°F (287°C) steam 2-12
  • graphite-powder

Flexible Graphite Packing (General Service)

Pure expanded graphite

Thermally conductive, self-lubricating

Used on pumps and valves

Temperature pH Pressure Speed
1250°F (650°C) steam 0-14 except strong oxidizers 3000 PSI (200 bar) 4000 FPM
  • graphite-powder

Flexible Graphite Packing (Inconel Wires)

Inconel wires reinforcement

Used for steam/high temperature services

Excellent valve stem packing

Temperature pH Pressure
1200°F (650°C) 0-12 except strong oxidizers 4000 PSI (275 bar)
  • graphite-powder

Flexible Graphite Packing (Carbon Graphite Fiber)

Easy to use/remove

Used on both pumps and valves

Temperature pH Pressure Speed
1250°F (650°C) steam 0-14 except strong oxidizers 3600 PSI (250 bar) 4000 FPM
  • graphite-powder

Gland Packing:

All packings Made of imported PTFE and high-pure powdered graphite through special treatment,having a high strength,low creep,good corrosion-resistance.used for braiding of seal packing